Difference between revisions of "ChaosVPN:OpenWRTHowto"

From CCCHHWiki
Jump to: navigation, search
(Zwischenspeicherung)
m (Zwischenspeicherung)
Line 18: Line 18:
  
 
- Reconnect to your Router  
 
- Reconnect to your Router  
 +
- Console: telnet 192.168.1.1, set a root password passwd and REMEMBER IT
 
- Go to Webinterface at 192.168.1.1
 
- Go to Webinterface at 192.168.1.1
 
- Connect the yellow port on your router to current infrastructure  
 
- Connect the yellow port on your router to current infrastructure  
Line 24: Line 25:
 
- Press "Available Software" Tab and select "C"
 
- Press "Available Software" Tab and select "C"
 
- Search for ChaosVPN and press "install"
 
- Search for ChaosVPN and press "install"
 +
 +
( - I did also install "screen" at this point)
 +
 +
- ssh root@192.168.1.1
 +
- edit the file /etc/tinc/chaosvpn.conf to fit your needs
 +
[Add expample here]

Revision as of 17:27, 13 April 2012

This is Howto for setting up an independent Box providing you with ChaosVPN

- Buy http://www.amazon.de/dp/B004YIT2ZI (or some equivalent Router)

- Open your Router and power on - Connect wired or wireless (use information provided with your router) - Go directly to your routers Webinterface (one of 192.168.1.1 or 192.168.178.1) and search for sth like "System -> Firmware Upgrade" (There is no need to change any of the configuration)

- Download current WRT version If you are using the Hardware above: http://downloads.openwrt.org/backfire/10.03.1/ar71xx/openwrt-ar71xx-wndr3800-squashfs-factory.img

- Upload the Image in your Webinterface - Press Start - DO NOT REBOOT, POWEROFF OR ELSE - Wait until done (Power LED should not flash)


- Reconnect to your Router - Console: telnet 192.168.1.1, set a root password passwd and REMEMBER IT - Go to Webinterface at 192.168.1.1 - Connect the yellow port on your router to current infrastructure - Go to "Network -> Interfaces" and activate WAN Connection with DHCP (assuming DHCP is available; you may configure DSL if you are connecting a modem) - Navigate to "System -> Software" and press "Update Lists" - Press "Available Software" Tab and select "C" - Search for ChaosVPN and press "install"

( - I did also install "screen" at this point)

- ssh root@192.168.1.1 - edit the file /etc/tinc/chaosvpn.conf to fit your needs [Add expample here]