Difference between revisions of "ChaosVPN:OpenWRTHowto"

From CCCHHWiki
Jump to: navigation, search
m (Zwischenspeicherung)
m (Zwischenspeicherung)
Line 28: Line 28:
 
( - I did also install "screen" at this point)
 
( - I did also install "screen" at this point)
  
- ssh root@192.168.1.1
+
- ssh root@192.168.1.1 (telnet won't work anymore)
- edit the file /etc/tinc/chaosvpn.conf to fit your needs
+
- edit the top part of file /etc/tinc/chaosvpn.conf to fit your needs
[Add expample here]
+
 
 +
$my_peerid = <nodename>
 +
$my_vpn_ip = 172.31.<your Subnet>.[1-255]
 +
 
 +
- generate your keys and send pubkey to openvpn team (fast response time) see [Howto]
 +
tincd -n chaos --generate-keys=2048
 +
 
 +
- start chaosvpn
 +
/etc/init.de/chaosvpn start
 +
 
 +
...be prepared for 150 new route entries

Revision as of 17:42, 13 April 2012

This is Howto for setting up an independent Box providing you with ChaosVPN

- Buy http://www.amazon.de/dp/B004YIT2ZI (or some equivalent Router)

- Open your Router and power on - Connect wired or wireless (use information provided with your router) - Go directly to your routers Webinterface (one of 192.168.1.1 or 192.168.178.1) and search for sth like "System -> Firmware Upgrade" (There is no need to change any of the configuration)

- Download current WRT version If you are using the Hardware above: http://downloads.openwrt.org/backfire/10.03.1/ar71xx/openwrt-ar71xx-wndr3800-squashfs-factory.img

- Upload the Image in your Webinterface - Press Start - DO NOT REBOOT, POWEROFF OR ELSE - Wait until done (Power LED should not flash)


- Reconnect to your Router - Console: telnet 192.168.1.1, set a root password passwd and REMEMBER IT - Go to Webinterface at 192.168.1.1 - Connect the yellow port on your router to current infrastructure - Go to "Network -> Interfaces" and activate WAN Connection with DHCP (assuming DHCP is available; you may configure DSL if you are connecting a modem) - Navigate to "System -> Software" and press "Update Lists" - Press "Available Software" Tab and select "C" - Search for ChaosVPN and press "install"

( - I did also install "screen" at this point)

- ssh root@192.168.1.1 (telnet won't work anymore) - edit the top part of file /etc/tinc/chaosvpn.conf to fit your needs

$my_peerid = <nodename> $my_vpn_ip = 172.31.<your Subnet>.[1-255]

- generate your keys and send pubkey to openvpn team (fast response time) see [Howto] tincd -n chaos --generate-keys=2048

- start chaosvpn /etc/init.de/chaosvpn start

...be prepared for 150 new route entries