Differences

This shows you the differences between two versions of the page.

--- item:prusa-mk4 [2025-11-29 13:25 UTC] – holger
+++ item:prusa-mk4 [2026-07-10 20:06 UTC] (current) – change printer ledge
@@ Line 1: / Line 1: @@
-====== Prusa Mk4 ======
+====== 3D Printer Prusa Mk4 ======
 ---- dataentry item ----
@@ Line 5: / Line 5: @@
 owner          : CCCHH
 access_itemacc : instructions
-status_state   : active
+status_itemstate:   active
 ----
 Our new 3D printer, bought in april 2024 with [[https://doku.ccc.de/Hamburg/Antrag_PrusaMK4|help from big C]].
-For slicing, use[[https://www.prusa3d.com/en/page/prusaslicer_424/|PrusaSlicer]] with the Prusa Mk4 0.4mm nozzle with input shaper profile.
+For slicing, use[[https://www.prusa3d.com/en/page/prusaslicer_424/|PrusaSlicer]] with the Prusa Mk4**S** MMU3 - **HF**0.4mm nozzle with input shaper profile.
 Print progress can be monitored and print jobs can be sent via prusa link, credentials can be found in the printers settings \\
 [[http://prusamk4.z9.ccchh.net/#dashboard|Mk4 PrusaLink Dashboard]]
-The textured printing boards are for PLA and PETG,
+The textured printing boards are for PLA and PETG, the
-smooth PEI only for PLA. The adhesion of PETG is too strong and will probably damage the surface. Also see https://help.prusa3d.com/article/flexible-steel-sheets-guidepost_2195
+smooth surface printing boards are only for PLA because the adhesion of PETG is too strong and will probably damage the surface. For more details see https://help.prusa3d.com/article/flexible-steel-sheets-guidepost_2195