Difference between revisions of "ChaosVPN:OpenWRTHowto"

From CCCHHWiki
Jump to: navigation, search
(Zwischenspeicherung)
(Zwischenspeicherung)
Line 15: Line 15:
 
- DO NOT REBOOT, POWEROFF OR ELSE
 
- DO NOT REBOOT, POWEROFF OR ELSE
 
- Wait until done (Power LED should not flash)
 
- Wait until done (Power LED should not flash)
 +
 +
 +
- Reconnect to your Router
 +
- Go to Webinterface at 192.168.1.1
 +
- Connect the yellow port on your router to current infrastructure
 +
- Go to "Network -> Interfaces" and activate WAN Connection with DHCP (assuming DHCP is available; you may configure DSL if you are connecting a modem)
 +
- Navigate to "System -> Software" and press "Update Lists"
 +
- Press "Available Software" Tab and select "C"
 +
- Search for ChaosVPN and press "install"

Revision as of 17:17, 13 April 2012

This is Howto for setting up an independent Box providing you with ChaosVPN

- Buy http://www.amazon.de/dp/B004YIT2ZI (or some equivalent Router)

- Open your Router and power on - Connect wired or wireless (use information provided with your router) - Go directly to your routers Webinterface (one of 192.168.1.1 or 192.168.178.1) and search for sth like "System -> Firmware Upgrade" (There is no need to change any of the configuration)

- Download current WRT version If you are using the Hardware above: http://downloads.openwrt.org/backfire/10.03.1/ar71xx/openwrt-ar71xx-wndr3800-squashfs-factory.img

- Upload the Image in your Webinterface - Press Start - DO NOT REBOOT, POWEROFF OR ELSE - Wait until done (Power LED should not flash)


- Reconnect to your Router - Go to Webinterface at 192.168.1.1 - Connect the yellow port on your router to current infrastructure - Go to "Network -> Interfaces" and activate WAN Connection with DHCP (assuming DHCP is available; you may configure DSL if you are connecting a modem) - Navigate to "System -> Software" and press "Update Lists" - Press "Available Software" Tab and select "C" - Search for ChaosVPN and press "install"